Sanding sanding and more sanding
Tiny Titan · new build
Glen L Tiny Titan Hydroplane
Building a small hydroplane for the kids to learn some basic boating skills on a fun boat!
Today I applied the fiberglass to the bottom of the hull. This actually went a lot smoother than I thought it would, but this is like the third boat that I've fiberglassed, so I think I'm finally figuring how to do it correctly.
I'm using a new epoxy and hardener, something different than I've previously used. So far it is more smelly but it seems to be a little bit less thick than the previous one, which makes it pretty runny. Fortunately I was able to squeegee out most of the excess so it actually looks pretty good and I won't have to do a ton of unnecessary sanding.
After this dries I will send everything down and then apply an additional layer of fiberglass tape along the sides of the hall. I also have yet to do the transom, so I will do that at the same time.
Got a little bit of sanding done today. Today was mostly the rough sanding so I used a belt sander with 80 grit just chopping up the wood. It's pretty smooth all around, there's some areas where I have to fix with more epoxy and then resand but overall it's looking a lot better.
Before the sanding
So I'm showing the rough edges on all of the bottom of the hull. As you can see there's lots of mistakes, lots of Gap, lots of overlap, and lots of sanding to do. This will be a multi-day sanding project as I will start with 60 grit or 80 grit on the belt Sander and then work my way to about 120 to 150 grit to prep it for fiberglassing.
Finished gluing on the other bottom plank. Lots and lots and lots of sanding to do, as these are very rough cuts.
Nobody else here is logging a Tiny Titan yet. See the boat.
What it cost
$1,966.00| Item | Qty | Supplier | Cost |
|---|---|---|---|
| Boat Plans | 1 | Glen-L | $75.00 |
| Ryobi Plug-in jigsaw | 1 | Home Depot | $100.00 |
| lumber | 1 | Home Depot | $100.00 |
| Fir AB Marine 1/4" 4x8 | 2 | Plywood company | $200.00 |
| Fir AB Marine 1/2" 4x8 | 1 | Plywood company | $137.00 |
| Birch 1/8 4x8 Plywood | 1 | Plywood company | $35.00 |
| Craftsman planer | 1 | Home Depot | $329.00 |
| Fasteners and Fiberglass kit | 1 | Glen-L | $400.00 |
| 6oz Fiberglass Cloth Roll | 1 | Amazon | $15.00 |
| 6HP 2 Stroke Hangkai Outboard Engine | 1 | Hangkai | $575.00 |