Upgraded my workbench by making it a custom fit for the boat and added casters. I think this is a necessary step because I don't like to do any sanding or cutting in the garage and from this point forward the boat is going to be too heavy and fragile to be lifting it back and forth to my outdoor sawhorse.
Tiny Titan · new build
Glen L Tiny Titan Hydroplane
Building a small hydroplane for the kids to learn some basic boating skills on a fun boat!
1
Make a book
Feed
The whole log, 3 entries and every photo,
laid out as a book to print, bind and keep.
All steps
Shop & Tooling
Plans & Lofting
Hull Panels
Stitch & Assembly
Fillets & Taping
Glassing & Epoxy
Hull Exterior
Deck & Coamings
Fairing & Sanding
Systems
Rig & Spars
Newest first
Planer
I had to buy a new tool because these plans call for somewhat non-standard dimensional lumber, all these one half inch are very very hard to find.
Buying the plywood
Picked up the plywood today. I grabbed mostly marine grade fir, but I could only find the 1/8 in in Birch.
Nobody else here is logging a Tiny Titan yet. See the boat.
What it cost
$1,966.00$1,537.00
Into the boat
$429.00
Tools & gear
| Item | Qty | Supplier | Cost |
|---|---|---|---|
| Boat Plans | 1 | Glen-L | $75.00 |
| Ryobi Plug-in jigsaw | 1 | Home Depot | $100.00 |
| lumber | 1 | Home Depot | $100.00 |
| Fir AB Marine 1/4" 4x8 | 2 | Plywood company | $200.00 |
| Fir AB Marine 1/2" 4x8 | 1 | Plywood company | $137.00 |
| Birch 1/8 4x8 Plywood | 1 | Plywood company | $35.00 |
| Craftsman planer | 1 | Home Depot | $329.00 |
| Fasteners and Fiberglass kit | 1 | Glen-L | $400.00 |
| 6oz Fiberglass Cloth Roll | 1 | Amazon | $15.00 |
| 6HP 2 Stroke Hangkai Outboard Engine | 1 | Hangkai | $575.00 |