Design
Centennial Spray 38
Designed by Bruce Roberts-Goodson
The Centennial Spray 38 is a big, heavy round bilge cruiser in the Bruce Roberts Spray family, 38 ft 6 in on the hull with a 14 ft 1 in beam and 4 ft 10 in draft, displacing about 35,600 lb. She can be built in wood epoxy, steel or aluminum, and the designer names strip plank as the wood epoxy method for this hull.
A wood epoxy boat built in New Zealand is shown on her page from bare hull to completion. Her owners reported 6 to 7 knots just off the breeze in a steady 20 knots with the mainsail partly furled and the mizzen not set. She can be rigged as a gaff ketch, gaff cutter, Bermudan ketch or cutter, or junk schooner, and the interior can be laid out in several ways, with a pilot house as an option.
What building a Centennial Spray 38 actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Centennial Spray 38 here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Dix 38 | Dudley Dix Yacht Design | 38′ 5″ (11.7 m) | 0 |
| Dix 38 Pilot | Dudley Dix Yacht Design | 38′ 5″ (11.7 m) | 0 |
| Hope of Glory 38 | Devlin | 38′ 4″ (11.68 m) | 0 |
| 38 ft Ketch | Benford Design Group | 38′ 0″ (11.58 m) | 0 |
| 39 ft D.E. Cutter Antares or Ketch Oracle | Benford Design Group | 39′ 0″ (11.89 m) | 0 |
| 39 ft D.E. Cutter Prometheus | Benford Design Group | 39′ 0″ (11.89 m) | 0 |