boatbuildlog

Jimmy Skiff II · step

Hull Exterior

Turning over, keel and skeg, rubrails, exterior structure.

Hull Exterior on every boat, not just the Jimmy Skiff II →

1
Builders
2
Entries
9.0
Median hours

Flipped the boat over Rounded over the daggerboard trunk slot Faired and rounded over the bottom side of the outwales Cleaned up the skeg fillet Applied first coat of epoxy to the daggerboard trunk slot, skeg, and the bottom side of the outwales

Also touched up cockpit epoxy where I'd missed spots yesterday because seeing it in daylight and upside down helped.

Read in context →

Hull washed, sanded, and first coat of primer. Blew through the epoxy at one corner of the transom, so I’ll seal that up later before varnishing it.

Read in context →