Ultralight Dinghy · step
Hull Exterior
Turning over, keel and skeg, rubrails, exterior structure.
Hull Exterior on every boat, not just the Ultralight Dinghy →
When I built this dinghy, it was meant to be used and abused. So I didn't want to have a fancy nice clean painted bottom that was gonna be high maintenance and scratch easy. So I built up the bottom with gel coat nothing fancy, just rolled it on with a high build nap roller. I was going to polish it up and make it shiny but then I thought it's gonna get scratched up anyway, so I left it the way it was. It has six coats of gel coat on the bottom. By doing this, it adds substantially to the weight of the finished boat.
These pictures show how many clamps it takes just to put one side of the rub rails on. The boat is so small and curvy that I had to strip the rails into two pieces to make the compound bends in such a short distance of 6 ft. I used western red cedar for the rails this saves on weight and rot resistance.
These pictures show the outside paint job almond Rust-Oleum enamel. I rolled and tipped this paint.