Design
Wa'apa
Designed by Gary Dierking
Wa'apa is Gary Dierking's plywood three-board canoe, built in 8 ft sections that join to make a 16 ft or a 24 ft outrigger sailing canoe. The name is the Hawaiian word for the canoes that island builders began making from three wide planks when sawn lumber arrived in the late 1800s. Dierking built a 16 ft version in the 1970s that unbolted in the middle, as a dinghy for his cruising trimaran. This design is similar in shape, with a center section that stretches it to 24 ft.
The 24 ft version seats four and can be sailed as a tacking outrigger or a shunting proa. No hull or ama section is longer than 8 ft (2.4 m), so the canoe can be built, stored and transported in a small space, though it can also be built in one piece to save weight. The three-section main hull and a two-piece plywood ama take six sheets of 6 mm (1/4 in) plywood, and the hull sides and ama can be 4 mm to save weight. The plans are in his book Building Outrigger Sailing Canoes.
What building a Wa'apa actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Wa'apa here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Cape Cutter 19 | Dudley Dix Yacht Design | 19′ 0″ (5.79 m) | 1 |
| Didi 26 | Dudley Dix Yacht Design | 26′ 3″ (8 m) | 1 |
| Eland 36 | Dudley Dix Yacht Design | 36′ 5″ (11.11 m) | 1 |
| Grey Seal | Iain Oughtred | 22′ 2″ (6.76 m) | 1 |
| Hornolo | Yannick Maignien | 18′ 1″ (5.5 m) | 1 |
| Idea 21 | Modern Wooden Boat | 6.3 m (20′ 8″) | 1 |