boatbuildlog

Design

30' Cruising Catamaran

Designed by Kurt Hughes

The 30' Cruising Catamaran is a cruising catamaran in developed plywood, 30 ft 1 in (9.2 m) long with a beam of 20 ft 2 in (6.16 m). It has full standing headroom in the hulls, and Kurt Hughes says it is still aerodynamic enough to perform well to windward. Below there are two large double berths. The designer describes the hulls as a balance between payload and performance.

Construction is his rapid cylinder-molded method in plywood and epoxy, and a composite version is also offered. A rotating mast and deep boards help it to windward. The plans cover the mainsail either boomless or with a boom. Listed weight is 2,950 lb (1,337 kg) on a displacement of 5,800 lb (2,636 kg), with a 300 sq ft mainsail, a 143 sq ft blade jib and a 231 sq ft genoa. The designer mentions one built in Alaska by Jim Dory.

What building a 30' Cruising Catamaran actually takes

Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.

0
Build logs
0
Launched
n/a
Median hours
n/a
Median months

Those medians firm up as more people log this boat.

Builds of this boat

Nobody has logged a 30' Cruising Catamaran here yet.

If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.

Start the first log of this boat

Boats like this one

Same type, closest in length.

Design Plans from LOA Logs
30' Demountable Catamaran Kurt Hughes Sailing Designs 30′ 1″ (9.17 m) 0
Jazz 30 Woods Designs 9.15 m (30′ 0″) 0
Jazz 30 Bateau 30′ 0″ (9.15 m) 0
Tiki 30 James Wharram Designs 9.15 m (30′ 0″) 0
Windsong Woods Designs 9.15 m (30′ 0″) 0
Sagitta Woods Designs 9.14 m (30′ 0″) 0