Design
36' Cruising Catamaran
Designed by Kurt Hughes
The 36' Cruising Catamaran is intended as a pocket ocean cruiser, 36 ft 2 in (11 m) long with a beam of 24 ft (7.32 m). It can be built by Kurt Hughes's rapid cylinder-molded method in plywood and epoxy, or with composite hulls. The design does without the usual large bridgedeck house, which the designer says gives better windward performance and more safety in severe conditions.
On the main deck, ahead of the cockpit, are two queen-size berths of 5 ft by 7 ft (1.52 m by 2.13 m). In the hulls there is a galley aft to port and an office and navigation station aft to starboard, with a lounging area amidships to starboard and a dining area to port. Each hull has a head forward of the beam and a single berth forward of that. Deep boards and kick-up rudders are fitted. Listed weight is 4,880 lb (2,214 kg).
What building a 36' Cruising Catamaran actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a 36' Cruising Catamaran here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| 36' Bridgedeck Catamaran | Kurt Hughes Sailing Designs | 36′ 2″ (11.02 m) | 0 |
| Mirage | Woods Designs | 11 m (36′ 1″) | 0 |
| Skoota 36 | Woods Designs | 11 m (36′ 1″) | 0 |
| Skoota 36 | Bateau | 36′ 1″ (11 m) | 0 |
| Raka | James Wharram Designs | 10.97 m (36′ 0″) | 0 |
| 35' Cruising Trimaran | Kurt Hughes Sailing Designs | 35′ 6″ (10.82 m) | 0 |