Design
Twin Star
Designed by Rob Macks
Twin Star is a 21 ft tandem baidarka by Rob Macks of Laughing Loon, 26 in wide and about 65 lb, a two-seat version of his North Star. The designer argues that the baidarka shape, with its volume carried well forward and aft, suits a tandem better than Greenland-based doubles, which leave little room for gear. He says the Twin Star has ample storage for long trips.
The stern stem was drawn with a vertical edge so a rudder could be fitted, though the designer reports that experienced paddlers handle it very well without one. One builder quoted on his page finished his at 68 lb fully fitted out and took it on a three week camping trip on the west coast of Vancouver Island. The plans run to four sheets of full-size templates, twice as many as his single kayaks, plus the building instruction book.
What building a Twin Star actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Twin Star here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Chesapeake Double | Chesapeake Light Craft | 21′ 0″ (6.4 m) | 0 |
| Chesapeake Triple | Chesapeake Light Craft | 21′ 0″ (6.4 m) | 0 |
| Great Auk Double | Chesapeake Light Craft | 21′ 0″ (6.4 m) | 0 |
| Orca 21 | Bateau | 20′ 9″ (6.34 m) | 0 |
| Reliance Tandem | Steve Killing | 20′ 8″ (6.3 m) | 0 |
| Chesapeake Sport Tandem | Chesapeake Light Craft | 21′ 8″ (6.6 m) | 0 |