Design
Wee Vera
Designed by Rob Macks
Wee Vera is a 10 ft 6 in strip-built double paddle canoe by Rob Macks of Laughing Loon, 30 in wide, 10 in deep at the center and 23 to 28 lb. Like his Wee Robbie it was inspired by Henry Rushton's Wee Lassie, but it is wider, and the designer describes it as more stable and able to handle more weight, up to 250 lb.
The hull has a flattened arch bottom with a firm chine for initial stability, stems that form a sharp V underwater to help tracking in wind, and flare at the sheer for a dry ride. It is stable enough to be set up as a traditional canoe with a seat at the gunwales. The designer recommends it as a first strip-building project because of its small size and simple shape, and says he would never be without one in his own fleet.
What building a Wee Vera actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Wee Vera here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Wee Robbie | Laughing Loon | 10′ 6″ (3.2 m) | 0 |
| Aerowood 310 SUP | Modern Wooden Boat | 3.1 m (10′ 2″) | 0 |
| 10-Foot Little Auk | Chesapeake Light Craft | 10′ 0″ (3.05 m) | 0 |
| Nymph 10 Canoe | Chesapeake Light Craft | 10′ 0″ (3.05 m) | 0 |
| Wood Duck 10 | Chesapeake Light Craft | 10′ 0″ (3.05 m) | 0 |
| Wood Duck 10 Hybrid | Chesapeake Light Craft | 10′ 0″ (3.05 m) | 0 |