boatbuildlog

Design

Melonseed 16

Designed by Marc Barto

The 16 ft Melonseed is a lapstrake plywood daysailer that Marc Barto designed from lines taken by Howard Chapelle, with a wineglass transom, an unstayed rig and wide, flat keels for easy trailering. She is 15 ft 2 in on the waterline with a 4 ft 10 in beam, draws 4 in with the centerboard up, weighs about 250 lb and sets a 90 sq ft gaff sail.

The hull is planked in 6 mm plywood lapstrake over steam-bent frames, and the plans also give an alternative of 1/4 in bead and cove strips under a 1/8 in veneer, which makes a cold-molded hull. No lofting is required, although the seller says that lofting is the best way to deal with a few measurements on the sheets that disagree. The plans are seven sheets plus four pages of designer's notes, are rated intermediate, and the design was featured in Boat Design Quarterly No. 29.

What building a Melonseed 16 actually takes

Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.

0
Build logs
0
Launched
n/a
Median hours
n/a
Median months

Those medians firm up as more people log this boat.

Builds of this boat

Nobody has logged a Melonseed 16 here yet.

If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.

Start the first log of this boat

Boats like this one

Same type, closest in length.

Design Plans from LOA Logs
16 ft Conch Ad Libitum Sailing Tender Benford Design Group 16′ 0″ (4.88 m) 0
Adelie 16 Bateau 16′ 0″ (4.88 m) 0
Blue Moon Grandpa's Archive 16′ 0″ (4.88 m) 0
Catbird 16 Chesapeake Marine Design 16′ 0″ (4.88 m) 0
Scud II Bartender Boats 16′ 0″ (4.88 m) 0
Sid Skiff Ray Speck 16′ 0″ (4.88 m) 0