Design
Taal Touring SUP
Designed by Michael Storer
Taal is a plywood touring stand up paddle board, 12 ft 6 in long and 30 in wide. It is a stitch and glue build from three sheets of 3 mm (1/8 in) plywood, 4 to 6 litres of epoxy and a small amount of framing timber.
The designer gives a finished weight of 8 to 11 kg with quality materials and 12 to 14 kg with the materials likely to be available in developing countries. It suits a paddler who would rather build a touring board than buy one, and it is a small project for a first try at stitch and glue.
What building a Taal Touring SUP actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Taal Touring SUP here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Kaholo Stand-Up Paddleboard 12-6 | Chesapeake Light Craft | 12′ 6″ (3.81 m) | 0 |
| 12' 8" Excursion | Newfound Woodworks | 12′ 8″ (3.86 m) | 0 |
| Plyak 12 | Bateau | 12′ 4″ (3.76 m) | 0 |
| Huron | Glen-L Marine | 12′ 9″ (3.89 m) | 0 |
| 13' Kanu | Boatkits | 3.91 m (12′ 10″) | 0 |
| Chenoa 12 | Bateau | 12′ 1″ (3.68 m) | 0 |