Design
Pro Tournament 26
Designed by Mark Bowdidge
A design listed by Mark Bowdidge of Bowdidge Marine Designs, Australia, between the 24 and 32 ft boats in his Pro Tournament range of deep-vee offshore centre consoles. The name appears in the designer's index of power boat designs, but there is no linked page and no published length, beam, power or fuel figures, so none are given here. Her sisters are strip plank composite hulls with 25 degrees of deadrise.
Anyone interested should ask the designer directly whether plans are available. If she follows the rest of the range, the build would be a large strip-planked project suited to an experienced amateur, and a boat of about this size usually takes 2,500 hours or more. Real hours from logged builds are below.
What building a Pro Tournament 26 actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Pro Tournament 26 here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Caladesi Carolina Dory | Spira International | 20′ 0″ (6.1 m) | 2 |
| Flying Saucer | Glen-L Marine | 12′ 3″ (3.73 m) | 1 |
| Malahini | Glen-L Marine | 15′ 11″ (4.85 m) | 1 |
| Sea Strike 16 | Bowdidge Marine Designs | 16′ 0″ (4.88 m) | 1 |
| Solo Flats Skiff (SK14) | Bateau | 14′ 0″ (4.27 m) | 1 |
| Squirt | Glen-L Marine | 10′ 0″ (3.05 m) | 1 |