boatbuildlog

Runabout · step

Finish & Cosmetic

Wraps, lettering, gelcoat touch-up, polish, and hiding the holes you drilled.

Finish & Cosmetic on every boat, not just the Runabout →

1
Builders
6
Entries
50.0
Median hours

More Photos

Read in context →

More Photos

Read in context →

July Updates After finishing the bilge paint, I rewired the entire boat to eliminate the automotive connectors, spliced wires, and cracked insulation. BestBoatWire.com was a great source for 16 AWG marine wire in various colors. Working from aft to fore, I tackled the dash last; running one wire at a time and bundling them neatly turned out to be the cleanest approach. Wiring the one-wire marine alternator and installing a functioning ballast resistor took the most research. Next, I pulled up the old vinyl flooring and laid down taupe marine carpet. (It appears the boat originally had light...

Read in context →

More Photos

Read in context →

More Photos

Read in context →

Steering Helm Upgrade As temperatures warmed up, the steering wheel became nearly impossible to turn due to a failed 20-year-old cable and helm. I replaced it with a SeaStar Teleflex (SSX17617) Tilt Xtreme NFB 16 ft Rotary Steering Cable & Helm Kit, which mated perfectly with the stock steering wheel. I decided not to activate the horn for now due to the difficulty of drilling through the dash for wiring, though the cable is routed if I decide to hook it up later. October & November Updates I refinished and reinstalled the engine cover with fresh paint and varnish, installed new Stewart-War...

Read in context →