Shearwater Sport Hybrid · step
Stitch & Assembly
Wiring or clamping the hull together and getting it fair and true before glue.
Stitch & Assembly on every boat, not just the Shearwater Sport Hybrid →
1
Builders
1
Entries
n/a
Median hours
Over the course of October, I assembled the hull and fibreglassed it inside & out. Knowing some more modern stitch & glue building techniques by now, I put the manual aside and assembled the hull slightly different:
- Silica-thickened epoxy for joining the panels, but I put no fibreglass tape over the joints. No problem occurred!
- I did not "tack weld" the hull after stitching it up. Instead, I used superglue, as CLC advises in some more recent manuals. This didn't work as good as I hoped for as my glueing work wasn't careful enough in some areas - to my surprise not at the bow or stern,...