Ultralight Dinghy · step
Glassing & Epoxy
Sheathing in cloth, wetting out, fill coats.
Glassing & Epoxy on every boat, not just the Ultralight Dinghy →
1
Builders
2
Entries
42.0
Median hours
Mark Elwell
42 h
Flipped the boat over, filleted all the board joints. Installed the 6 ounce cloth to the bottom and the keel. Built out the seat, trimmed, continued filling, sanding, faring, and all the stuff you would do to build up the finish of the hull before painting.
This picture displays the keel after it was installed and filleted. I didn't cut a handle in my keel. Wanted to have the best tracking when I towed behind the boat.