boatbuildlog

Ultralight Dinghy · step

Stitch & Assembly

Wiring or clamping the hull together and getting it fair and true before glue.

Stitch & Assembly on every boat, not just the Ultralight Dinghy →

1
Builders
1
Entries
24.0
Median hours

After cutting out all the parts with the router. I carefully laid out all the planks in the correct order right, left, ins, and outs. I didn't use copper wire, I used less the expensive soft steel baling wire for the plywood stitches that I got from Home Depot. I used Tight Bond 2 to glue all the planks together instead of superglue. That's what I had in the shop, so I just used what was on hand. My wife helped me hold each plank and with the stitching. Then we celebrated the last plank with a shot of whiskey!

Read in context →