boatbuildlog

Polliwog 8 · step

Glassing & Epoxy

Sheathing in cloth, wetting out, fill coats.

Glassing & Epoxy on every boat, not just the Polliwog 8 →

1
Builders
1
Entries
3.0
Median hours
Matt 3 h

Phase 3: Fiberglassing the Exterior

In this next step, I fiberglassed the exterior of the boat. I used a single sheet and carefully draped it around all of the sides, including the transom. As I applied the epoxy, I let the drips fall onto a plastic sheet laid out below the boat.

A couple of lessons from this first build and my first time working with epoxy:

You need way less epoxy than you'd think. And if you spot a bubble or a large pocket of epoxy and you're debating whether to fix it now or sand it out later, fix it now, before the epoxy cures. Sanding is already a difficult...

Read in context →