boatbuildlog

Design

T2

Designed by Gary Dierking

T2 is an 18 ft (5.4 m) shunting outrigger canoe by Gary Dierking, modeled mostly on the canoes of the Marshall Islands and nearby Kiribati. The strip planked composite hull is a deep rounded vee with an asymmetric shape and identical ends, sailed with either end as the bow while the ama stays to windward. The hull is 16 in (406 mm) wide and the canoe 9 ft wide overall. It weighs 65 lb bare and 135 lb fully rigged, and carries 87 sq ft of sail. The asymmetric hull needs no leeboard or foils.

Dierking describes it as a sport canoe for one or two people, not a load carrier. The cockpit floor sits above the waterline and drains itself, there are watertight bulkheads in each end, and the crew sits on a platform over the windward side. Two rigs are drawn: the classic Oceanic lateen, and his version of a rig developed by Euell Gibbons in the 1950s, which he calls still experimental. Steering is by an oar and by shifting crew weight. The plans are in his book Building Outrigger Sailing Canoes.

What building a T2 actually takes

Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.

0
Build logs
0
Launched
n/a
Median hours
n/a
Median months

Those medians firm up as more people log this boat.

Builds of this boat

Nobody has logged a T2 here yet.

If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.

Start the first log of this boat

Boats like this one

Same type, closest in length.

Design Plans from LOA Logs
Ulua Gary Dierking 17′ 9″ (5.4 m) 0
Snipa no. 30 Båtritningar 5.4 m (17′ 8″) 0
Expedition Sailing Canoe B&B Yacht Designs 17′ 9″ (5.41 m) 0
Snipa no. 9 Båtritningar 5.39 m (17′ 8″) 0
Lit'l Coot 18 Full Keel Devlin 17′ 10″ (5.45 m) 0
Cat Ketch 17 Bateau 17′ 6″ (5.33 m) 0