Design
Ulua
Designed by Gary Dierking
Ulua is an 18 ft (5.4 m) outrigger sailing canoe by Gary Dierking, one of the three boats in his book Building Outrigger Sailing Canoes. The hull broadly resembles the classic Hawaiian canoe, with a little more vee for speed and windward ability, and is built in strip planked composite. The main hull is 470 mm wide, the canoe is about 6 ft 7 in wide overall, and it weighs 64 lb bare and 122 lb fully rigged. A pivoting leeboard gives lateral resistance and retracts for paddling or landing in surf.
The 65 sq ft tacking rig plugs in on a fiberglass windsurfer mast, can be lowered at sea and stowed on the crossbeams, and furls with a brailing line. The designer says the canoe can be paddled, sailed, surfed or driven by a two horsepower outboard, set up as a single or double outrigger, and carried on a car roof. The ama is either solid foam covered with fiberglass or hollow and strip planked. The hull can be stretched by spacing the molds farther apart, and his page shows builders' boats of 24 and 27 ft. The plans are in the book.
What building a Ulua actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Ulua here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| T2 | Gary Dierking | 17′ 9″ (5.4 m) | 0 |
| Snipa no. 30 | Båtritningar | 5.4 m (17′ 8″) | 0 |
| Expedition Sailing Canoe | B&B Yacht Designs | 17′ 9″ (5.41 m) | 0 |
| Snipa no. 9 | Båtritningar | 5.39 m (17′ 8″) | 0 |
| Lit'l Coot 18 Full Keel | Devlin | 17′ 10″ (5.45 m) | 0 |
| Cat Ketch 17 | Bateau | 17′ 6″ (5.33 m) | 0 |