boatbuildlog

Hot Rod · step

Sea Trials & Shakedown

First sails or runs, trim, tuning, and the punch list that follows.

Sea Trials & Shakedown on every boat, not just the Hot Rod →

1
Builders
6
Entries
n/a
Median hours

1. Here's a good friend of mine, Colin, rebuilding the v-drive. It's nice to have a Class A mechanic in the shop ! He's rebuilt the engine and is our ace fabricator / welder. He enjoys working on the mechanical components of the boat but is quite emphatic about staying on firm ground on launch day...

2. Before you know it, the v-drive is fully assembled. The v-drive plate was painted before final assembly. The plate was pretty rough, so we blocked it out with several coats of epoxy primer. This was followed up with Dupont 280CR DTM primer, Dupont Uro-Prime urethane primer-surfacer and...

Read in context →

1. Rubber webbing will ultimately suspend the seat foam. The webbing slots were laid out on the stock. A 1/4" drill bit was used to drill the slot end points. Most of the material was removed with a jigsaw.

2. Jigging a hand-held plunge router was too complex, so we mounted a 1/4" straight-cut router bit in the drill press. Moving the stock back and forth while lowering the router bit 1/8" at a time did the trick.

3. Here's the finished piece. No, we won't be using regular lawn chair webbing ! We've ordered a stretchy UV-resistant rubber webbing commonly used in the upholstery tr...

Read in context →

Lately, a hot topic on Glen-L's Boatbuilder Forum has been automotive engine conversion for marine use. If you've been dreaming about building an inboard powered boat but are intimidated by the installation process, this article may answer a few of your questions such as 'where do I start' and 'what are my options'. A good place to start is by reading the book Inboard Motor Installations written by Glen L. Witt and Ken Hankinson. This reference book covers all aspects of engine conversion and installation and should provide the insight and inspiration to tackle the job yourself. You'll also ne...

Read in context →

Click the 'Play' button (>) to see the video. Hot Rod Sea Trial 2 - Ottawa River Run [HD] (CyberNick)

1. One of the last interior jobs is to finish up the front cockpit seating. Click here to see our work in progress.

2. Time for some serious finishing ! Dash and front cockpit carlings received three rounds of epoxy (block sanded between coats) and 2 rounds of Perfection 2 part varnish. This is not the final veneer layer for the dash and carlings. We'll be adding a more exotic veneer over the Winter months !

Click the 'Play...

Read in context →

It's been a long time since our last update. We've clocked 12 hours on the engine since our launch last October. It has performed flawlessly but we expect that the hydraulic camshaft won't stand up to sustained high RPM usage. Last month, we pulled the Hot Rod's 355 Chevy engine and will be upgrading it for severe duty service. This includes installation of a main bearing stud kit, Air Flow Research aluminum cylinder heads, hydraulic roller camshaft, aluminum roller rocker arms and an Edelbrock RPM Air Gap intake manifold.

Click here to see more engine assembly photos.

Click the 'Play' butto...

Read in context →

The boat needs a major cleanup when we get home !!.

The Gathering was a blast. I'd like to thank everyone who organised the event and all who attended. Special thanks to Gayle and Glen-L Marine Designs for providing Saturday lunch, the Sunday Breakfast crew (Bruce Dow, his Dad Brian) and everybody who pitched in to make this the best Gathering to date. Your hospitality and fellowship keeps us coming back year after year !

Click on the links below to see more photos of the event : Gayle's Blog and Photos Glen-L Gathering 2011 Photo Album ttomshaw's Photo Album vupilot's Photo Album Glen-L Boa...

Read in context →