boatbuildlog

Tiny Titan · step

Deck & Coamings

Decking, hatches, coamings, cockpit rim.

Deck & Coamings on every boat, not just the Tiny Titan →

1
Builders
4
Entries
5.5
Median hours
Matt 5.5 h

Finished mounting a few more pieces. Lots of wood flour to fill these gaps

Read in context →

More glue and more clamping.

I fitted the carling on both sides of the coaming and glued in place. Lots of clamps and a few temporary screws for this step.

Read in context →

Today I flipped the boat over and started to prep the bottom. I can already see lots of holes and things that I will need to fix before I start on the final sanding before glassing.

Oh and also I think I messed up on the sides. I know hundreds, rather thousands of people have built Glen L boats but honestly the pictures and descriptions I think are lacking, at least for amateur builders like myself. In any case I think I messed up. As you can see in the images I took the one quarter inch plywood and mounted it directly onto the side of the bottom pieces, they call this the non-trip planking...

Read in context →

Arggggg, I made another mistake. If you look at the plans, all of the side and bottom paneling is supposed to be 1/4 inch. That means the runner planking I put on yesterday was 1/8 inch instead of 1/4 inch. Oops. I definitely should be looking at the plans, but at this point there are so few pieces left to go on the boat that I'm really relying on my knowledge, skills, and experience to get through the build.

Anyway, there are a couple of ways to fix this:

  1. Sand everything back down to the beginning. This would remove the pieces I put on yesterday along with all the glue, basically...
Read in context →