Just spent a few minutes in my workshop today. Took some care of the mast thwart. The upcoming days the progress will be smaller. Since today I am back at work so there is not so much time to work on the boat.
Read this entry in the log → Deck & Coamings on every Northeaster Dory →Deck & Coamings
Decking, hatches, coamings, cockpit rim.
104 entries from 7 logs, newest work first.
Arggggg, I made another mistake. If you look at the plans, all of the side and bottom paneling is supposed to be 1/4 inch. That means the runner planking I put on yesterday was 1/8 inch instead of 1/4 inch. Oops. I definitely should be looking at the plans, bu...
Read these entries in the log → Deck & Coamings on every Tiny Titan →Time to get going again on this build. But first I have some rebuilding to do. I mistakenly thought “she’ll be right” with regard to cockpit drains and omitted ball valves on thru-hulls but now I’ve thought better of it. Prob is I’ve built in the cockpit sole...
Read these entries in the log → Deck & Coamings on every Grey Seal →Phase 13: Mast Box and Daggerboard (Sailing Kit Only) I'm sure I'm missing a few steps in between, since I don't seem to have any photos of the interior gunnels. But moving on: this next step is specific to the sailing kit. If you're building the Dory as a sta...
Read this entry in the log → Deck & Coamings on every Northeaster Dory →What followed was 2 weeks of painting work. Masking, priming, painting, second coat, touchup, removing the masking tape, more touchup etc. I am not going to take you through the agony in great detail. I use Interlux Interdeck non-slip paint in sandy beige for...
Read these entries in the log → Deck & Coamings on every The Guider →Houseboat update, Saturday, November 30, 2019 – Jersey Girl’s aft deck hatch covers are functionally complete, which is to say they fit and they are well sealed with several coats of epoxy – and they cover the hatches, which is what they are supposed to do. Fi...
Read these entries in the log → Deck & Coamings on every Jersey Girl →1–2. Starboard deck was installed using thickened epoxy and fastened with silicon bronze screws.
Read these entries in the log → Deck & Coamings on every Hot Rod →