boatbuildlog

Tiny Titan · step

Glassing & Epoxy

Sheathing in cloth, wetting out, fill coats.

Glassing & Epoxy on every boat, not just the Tiny Titan →

1
Builders
3
Entries
4.0
Median hours
Matt 4 h

Starting to epoxy the interior, it's getting a bit hot in the garage so I'll stop for today. We have some more surfaces but probably I am about 70% done.

Read in context →

I put on the second coat of epoxy for the entire interior. Tomorrow I will do a sand of the interior and prep for paint and primer.

Read in context →

Today I applied the fiberglass to the bottom of the hull. This actually went a lot smoother than I thought it would, but this is like the third boat that I've fiberglassed, so I think I'm finally figuring how to do it correctly.

I'm using a new epoxy and hardener, something different than I've previously used. So far it is more smelly but it seems to be a little bit less thick than the previous one, which makes it pretty runny. Fortunately I was able to squeegee out most of the excess so it actually looks pretty good and I won't have to do a ton of unnecessary sanding.

After this dries...

Read in context →