boatbuildlog

Tiny Titan · step

Stitch & Assembly

Wiring or clamping the hull together and getting it fair and true before glue.

Stitch & Assembly on every boat, not just the Tiny Titan →

1
Builders
3
Entries
3.5
Median hours
Matt 3.5 h

It is definitely starting to look like a boat now. Today I glued and mounted the side planks and the transom as well as the sheer clamp to frame one. I also went ahead and glued and mounted the bow piece.

I'm at the point now where it's going to get heavy enough where I would like to have some casters so I will probably go to Home Depot later today and get a bunch of 2x4 so I can build a mobile sawhorse.

Read in context →

Well, I broke another piece. Honestly, I kind of expected this one to break. I had broken it a while back and just put a Band-Aid on it, but this time it needed a proper fix: a scarf joint.

Today I spent quite a bit of time dry fitting everything on the boat, including the coaming, the transom frame, the engine boards, and the dashboard panel. Nothing fits perfectly. I know I've complained about this in almost every post, but nothing fits perfectly. Everything is a quarter inch off, and in some cases up to half an inch off. It's frustrating, since I've put a lot of time into getting here an...

Read in context →

Glued on some more of the transom frame

Read in context →