boatbuildlog

Bahia 12 · step

Hull Panels

Scarfing plywood, cutting panels, milling strips or planking stock.

Hull Panels on every boat, not just the Bahia 12 →

1
Builders
3
Entries
12.0
Median hours

Planed and sanded keel edges to land on frames, Faired frames to match angle of chime. Bent on plywood and marked cutlines--easy way to get shape of side panels. Using 3/8" exterior fir plywood as it all will be covered by epoxy.

Read in context →

Closed up bow with narrow strips of plywood. Extreme angle makes it too tough to use a single panel.

Read in context →

Filled low parts of bow with thickened epoxy and leveled. Basic shape all that's needed at this point with plenty of fiberglass and fairing ahead.

Read in context →