boatbuildlog

Jersey Girl · step

Fairing & Sanding

The long one. Fairing compound, longboards, and the sanding nobody photographs enough.

Fairing & Sanding on every boat, not just the Jersey Girl →

1
Builders
3
Entries
n/a
Median hours

Houseboat update, Monday, January 7, 2019 -- Starting to laminate a fresh stack of quarter-inch strips into an arched roof support. Thinking a few steps ahead, it occurs to me that the inside curve of these arches will be a visible design element of the cabin ceiling, constantly on display as evidence of how much I care about aesthetic considerations. I think I care a lot, so that surface will be sanded and finished to a warm amber glow. So it occurs to me that it's easier to sand now, while it's flat, then later, when it's the inside curve of a glued-up laminate. The sanded surface will be st...

Read in context →

Houseboat update, Saturday, August 31, 2019 -- Today started with the correction of a mistake, and ended with getting Jersey Girl's central roof ready for fiberglassing. Late yesterday, pushing past sensible physical limitations, I decided to get a jump on installing the starboard roof overhang. It's a good thing I got only a little done, because I discovered this morning that it was 3/16 inch wider than the overhang on the port side. I doubt anyone would have noticed, but I know it would be a source of continuing irritation to me! I could zip through this in a few seconds with a power saw, bu...

Read in context →

Houseboat update, Friday, October 25, 2019 -- the starboard gull wing has its face board installed and its green fairing glop applied. When this cures, I'll sand it down, then fiberglass it. Now, on to the same treatment for the port side, and a whole bunch of long- deferred little details that have to be attended to.

Read in context →