Jersey Girl · step
Planning & Research
Choosing the design, sourcing plans or a kit, budgeting, lining up materials.
Planning & Research on every boat, not just the Jersey Girl →
March 5, 2015. Intrigued by the "tiny house" phenomenon, I stumble across this plan for a tiny houseboat. It's 17 feet long overall, with a beam of just under eight feet (so it can be towed on a trailer anywhere) and a draft of just six inches. A few years earlier, I found it necessary to sell a beloved home in coastal Downeast Maine, and I've yearned for something to replace it ever since. Could this be the answer? Hmmm...
March 30, 2015. I'm still thinking about Dianne's Rose. I have not bought the plans yet, but the pull is getting stronger. I'm no stranger to boat construction, having built a family fleet of seven kayaks and a sailing dinghy so far, and they all turned out great. For instance, here's a shot of Noah, Taylor and Julio, my three grandsons, in the kayaks I built for them -- during a family vacation at Squam Lake in New Hampshire, in August of 2013.
April 1, 2015. This houseboat would be a project of far greater magnitude than anything I've ever done. Each of those earlier boats took about three months of somewhat obsessive spare time. This would take years -- how many, I am not exactly sure. I keep going back to Roy Schreyer's web site to tease myself with some of the photos he has posted.
July 2, 2015. I start to think about tweaks to the design. What if I made the outboard motor well a little more commodious -- could I install a larger engine than the 9.8 hp unit recommended by the designer? And provide a little more stern outside deck space? and maybe a little more cabin space for room for a shower in the area reserved for the head? (Head is toilet in boat-speak.) So I called a temporary halt to building, drew a few ideas on paper and started making a scale model to test my ideas out. When I saw what was happening with the model, I resolved to commit to adding three feet to t...
July 5, 2015. Continuing to think of modifications to make this still-unnamed houseboat more of a challenge to build (as if it's not already a handful), and more of a pleasure to use when it's done. As I work on the scale model, I notice that flat, 4 x 8-foot deck out front, in the bow. It looks like a perfect place to cover with a retractable fabric shelter to turn it into sleeping space for grandchildren. But what if they roll off into the water? Not good. A nice wooden railing and balusters might be a good idea. But does it really need to be that high up off the water? If it were lower down...
Houseboat update, Saturday, October 13, 2018 -- I've decided to scale back a bit on the grandiosity of my tweaks to Jersey Girl, bringing her more into line with Roy Schreyer's excellent plans. She's stretched out by 3 feet to a 20-footer, and I'm sticking with my plans to recess the central ares of the fore and aft decks. I'm also extending the main cabin roof out over the aft deck, for a shaded outdoor sitting area and a place to install a real stand-up solar-heated shower. But after getting great advice from fellow boat builders on Facebook, I've decided to step away from my earlier notion...
Houseboat update, Thursday, January 3, 2019 – The new, lower arc is released from its jig, and I like it. At first, the sides were uneven due to variations in the thickness of the Douglas fir framing lumber I was using. Not only is a two-by-six not two inches thick, it’s not even reliably an inch and a half thick. What’s good enough for a wall stud in a house is not – at first – good enough for a project like this. Also, the sides of the arc were covered with lumpy hardened epoxy that had squeezed out as I tightened the stack of strips with my clamps. Sanding these imperfections down would ha...
Houseboat update, Monday, May 20, 2019 -- One of my design modifications for Jersey Girl was to recess the central portion of the fore deck to provide comfortable outdoor seating space with a footwell, and a taller entry door into the cabin. That will require a railing, for safety. Today, I am starting to make two of the six posts I will need to wrap the railing around the deck and accommodate for convenient entry gates. These posts are going to require some creative saw work to make them fit around the frame of the hull and into the angle of the bow. I'll describe what I'm doing with each pic...
Houseboat update, Saturday, September 7, 2019 – The adventure so far in a nutshell. A friend who is building from the same design I am using for Jersey Girl asked how long we all had been building. I thought it would be worthwhile to share my answer more widely. First, however, major credit goes to the originator of the plans I am working from, even though I have made modifications: Roy Schreyer, at RoyDesignedThat.com. I started work on the long frames and bulkheads of what would become Jersey Girl on June 6, 2015, and then decided to extend the length to 20 feet, so backtracked a bit to saw...