Wooden Shoe · step
Strongback & Molds
Building the strongback or ladder frame and setting up station molds.
Strongback & Molds on every boat, not just the Wooden Shoe →
PLease watch the video below! We are facing challenges with the bow construction of our DIY wooden boat. This video shows the detailed process of how to build a boat's bow, from reviewing the drawing to preparing the Chechen wood. We cut boards to precise thickness and then clamp them to supports for cold molding, painstakingly gluing sections together to ensure no gaps. It's a true test of our boat construction skills, especially when bending wood to shape the bow.
Building the bow of our DIY wooden boat in the Mexican jungle — and it fights back! 🌴🚤 In Part 1 of this bow build, we tac...
This is a recap of 200 days of our DIY boat build so far, — from making our own marine plywood to finishing the Cumaru wood transom. Every station, every frame, every struggle — in one video.
🪵 What you'll see: • How we make marine plywood from scratch • Five stations going up — first milestone • Precision bulkhead fitting and reinforced frames • Web stations complete • The Cumaru wood transom — DONE • Station 7 — the biggest frames finished • The bow challenge — where the wood fights back
This is the Wooden Shoe — a 25-foot powerboat design by Nexus Marine, built with Brazilian...
After our recent marine survey revealed gaps in the keel and frame alignment on our Wooden Shoe 23, it was time for a complete survey fix! In this episode, we address frame gaps at stations 9, 11, 12, and 13, fit and secure the transom, mix Gflex epoxy for small-batch gluing, and shape the keel-to-bow connection to get a smooth, fair curve.
Follow along with our traditional wooden boat building journey here at Jungle Ranch as we tackle these frame adjustments step-by-step and prepare the hull for the next phase of construction!
If you enjoyed the video, please give it a Like, drop a comm...