boatbuildlog

14 ft Rapid Robert · step

Glassing & Epoxy

Sheathing in cloth, wetting out, fill coats.

Glassing & Epoxy on every boat, not just the 14 ft Rapid Robert →

1
Builders
1
Entries
n/a
Median hours

Another busy week. Its getting harder and harder to remember all the steps in our process, but last saturday we glassed the topsides and bottom. First off, all the seams were taped to ad reinforcement using 105/205 and 6 oz 4 inch fiberglass tape. Next, we started on the sides, the hull was wetted with west system 105/205 epoxy and then blanketed with 6oz fiberglass cloth. The cloth was wetted out using rollers, i mixed as Mack rolled. We taped the bottom along the corners with 4 inch tape as well in order to fill in the gap between our 38inch cloth and our 44 inch beam. Then we glassed the ce...

Read in context →