Production model
Hunter 356
Built by Hunter
A 34 ft 6 in fractional sloop designed by Glenn Henderson, built from 2000. She carries 12 ft beam, 6 ft 5 in draft and 13,900 lb displacement. Hull form is fin with a spade rudder. About 500 were built.
Hunter built in Alachua, Florida and aimed at volume production cruising boats with generous accommodation for the length. They are plentiful and affordable on the used market, and the brand continued as Marlow-Hunter after 2012. The figures below come from owners who logged work on this boat here.
What building a Hunter 356 actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Hunter 356 here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Model | Builder | LOA | Logs |
|---|---|---|---|
| Catalina 34 | Catalina Yachts | 34′ 6″ (10.52 m) | 0 |
| Catalina 355 | Catalina Yachts | 34′ 6″ (10.52 m) | 0 |
| J/105 | J/Boats | 34′ 6″ (10.52 m) | 0 |
| C&C 35 | C&C | 34′ 7″ (10.54 m) | 0 |
| Hunter 34 | Hunter | 34′ 5″ (10.49 m) | 0 |
| Tartan 34 | Tartan | 34′ 5″ (10.49 m) | 0 |