Adding hull panels
Planed and sanded keel edges to land on frames, Faired frames to match angle of chime. Bent on plywood and marked cutlines--easy way to get shape of side panels. Using 3/8" exterior fir plywood as it all will be covered by epoxy.
Bahia 12 · new build
See Hull Panels on other boats →
Planed and sanded keel edges to land on frames, Faired frames to match angle of chime. Bent on plywood and marked cutlines--easy way to get shape of side panels. Using 3/8" exterior fir plywood as it all will be covered by epoxy.
Closed up bow with narrow strips of plywood. Extreme angle makes it too tough to use a single panel.
Filled low parts of bow with thickened epoxy and leveled. Basic shape all that's needed at this point with plenty of fiberglass and fairing ahead.
Nobody else here is logging a Bahia 12 yet. See the boat.