Design
Sorrento
Designed by Glen-L Marine
A 36 ft sedan cabin cruiser from Glen-L Marine with a full planing hull, double-diagonal plywood bottom and sheet plywood sides, three staterooms for three couples, a midships U-shaped galley, a convertible dinette and a deckhouse helm with all-round visibility. Single or twin inboards; about 15,600 lb. Glen-L publish a beam of 14 ft 1 in and a hull depth of 5 ft 7 in.
Headroom below is 6'-3" min. The hull is a full planing with double diagonal planking on the bottom, and sheet plywood on the sides. For power they specify single or twin inboard motors, centrally located with proper reduction gear. A large amateur project with a double-diagonal bottom to plank. Expect 4,000 to 6,000 hours. Measured medians from logged builds appear below.
What building a Sorrento actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Sorrento here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| 36 ft Cruiser | Benford Design Group | 36′ 0″ (10.97 m) | 0 |
| 36 ft Power Dory | Benford Design Group | 36′ 0″ (10.97 m) | 0 |
| Kokanee 36 | Devlin | 36′ 0″ (10.97 m) | 0 |
| Dauntless | Glen-L Marine | 35′ 8″ (10.87 m) | 0 |
| Odyssea | Glen-L Marine | 35′ 8″ (10.87 m) | 0 |
| Yukon | Glen-L Marine | 35′ 8″ (10.87 m) | 0 |