boatbuildlog

Grey Seal · step

Glassing & Epoxy

Sheathing in cloth, wetting out, fill coats.

Glassing & Epoxy on every boat, not just the Grey Seal →

1
Builders
2
Entries
n/a
Median hours

Now that weather has warmed a little it’s easier to get my lazy bones out in the shed again. The rudder is about 3/4 done and in this photo it’s mounted to sternpost and blade has been dyneled and 3 coats of neat epoxy. I tinted the coats that’s why it looks a little 70’s. Still deciding how to to treat the cheeks and gotta make the tiller too.

Currently working on fairing deck beams (gentle application of belt sander!) then the grind of epoxy coating and painting them.

Just for a major injection of enthusiasm I made up the templates for cabin ply out of mdf and some wallpaper ones for decki...

Read in context →

Dynel and peel ply isn’t as easy as it seems at first sight. I’ve done a little fibfreglassing in past with 6oz cloth but wetting out Dynel is a bit more difficult. After a first failed attempt I stripped it all off and filled three bins. For the next go I had my epoxy coated and sanded ply all ready so outgassing hopefully wouldn’t be as much of a problem this time round. What I failed to realise first time was that the days peak temperatures were not til 5 pm! So this time I started then and finished about 9.30. So after a rough, levelling sand this is what it’s come up like.

also had some...

Read in context →