boatbuildlog

Spartan II · step

Plans & Lofting

Reading the drawings, lofting full-size, making patterns and templates.

Plans & Lofting on every boat, not just the Spartan II →

1
Builders
3
Entries
15.5
Median hours

Laid plywood on shop floor, painted it flat white, laid out a baseline, waterlines, stations, and started to draw the lines at full size.

Read in context →

Lofted the halfbreadths, and checked the bodyplan against them. We forgot that the halfbreadths gave valuable information to the bodyplan, so had to make some adjustments to virtually every station. Obviously need more practice lofting!

Read in context →

More lofting, and then lifting patterns from the lines. We placed nails, sideways, with their heads on on the line we wanted to lift. Then we put doorskin ply over top of those nails, and stomped on them. Lifted the doorskin, put finishing nails into the impressions the nailheads created, put battens around them, drew the lines, and cut the doorskins out on the bandsaw.

Read in context →