7 members. Used Jim Tolpin's Beam Rule lofting method to lay out basic lines. This is a historic layout method uses proportions rather than offsets to describe a hull shape. We're lofting the half breadth and profile at 1/2 scale. The body plan will be lofted...
Read this entry in the log → Plans & Lofting on every Forest & Stream Skiff →Plans & Lofting
Reading the drawings, lofting full-size, making patterns and templates.
9 entries from 6 logs, newest work first.
This might not be the standard way to calculate a vessel's displacement. I used this method when calculating specs for a SUP board, and practical experience confirmed it was sufficiently accurate. Calculating displacement is necessary to determine the vessel's...
Read these entries in the log → Plans & Lofting on every Sea Scout →This boat has a very limited purpose: to paddle ~50ft from a sandy canoe launch to a sailboat on a mooring in a protected harbor, tie off to the mooring for a couple hours while I go sailing, the do the same in reverse on the way back. It has 2 predecessors: a...
Read this entry in the log → Plans & Lofting on every Micro-Wherry →Just received the plans and the family is eager to start tracing (even though Dad doesn't quite know how to build a Glen l boat yet. I'm going to do my best to document the build so others can see how to build this boat and potentially other glen ls in the fut...
Read this entry in the log → Plans & Lofting on every Tiny Titan →More lofting, and then lifting patterns from the lines. We placed nails, sideways, with their heads on on the line we wanted to lift. Then we put doorskin ply over top of those nails, and stomped on them. Lifted the doorskin, put finishing nails into the impre...
Read these entries in the log → Plans & Lofting on every Spartan II →I went to an architect to have the PDF plans printed out. Then I glue them to a thin piece of plywood to make templates for the router to follow on the finish planks later on.
Read this entry in the log → Plans & Lofting on every Ultralight Dinghy →