boatbuildlog

Spartan II · step

Strongback & Molds

Building the strongback or ladder frame and setting up station molds.

Strongback & Molds on every boat, not just the Spartan II →

1
Builders
3
Entries
9.5
Median hours

We're planning to make many components of the boat from reclaimed and recycled materials. Over the years Arnt has collected a lot of stuff, including a number of stacks of old growth Douglas Fir church pews. These bits we've put through the thickness planer are the ends of pews, you can see the rabbets for the seat tops and backs.

We traced out the pattern for the inner stem onto a worktop, placed a pew end on it, put the pattern on top, and selected the best angle to get the grain working with the curve. Trace it, cut on bandsaw, and repeat until we've built up to correct thickness, stagge...

Read in context →

Epoxy, and lots of weights for clamping pressure.

Read in context →

Inner Stem, continued: cleaned up the glue squeeze out.

Read in context →