So I’ve been making the transom recently which consists of two layers of 1/2” ply and...
So I’ve been making the transom recently which consists of two layers of 1/2” ply and two more layers for the “frame” . Glued/filleted on the cleats for cockpit seats, transom stiffeners and propane locker, you’ll also notice a few holes for tiller, cockpit drains and steps from aft swim platform to climb on/off boat. Still got the epoxy coating to go but it’s a bit cold here. This boat has a lot of stringers running the length of hull and that’s what all the notches are for.
