Paper Jet 14 · new build
First boat, single garage and garden, at weekends and evenings only
Set up the mast cradle for epoxy coating with a simple 90° positional adjustment. First coat applied to seal the surfaces. Currently missing the through hole at the base of the mast for retention pin. I'll add that later. I intend to glue the joiner tube on and epoxy coat the mast and tube together for a good finish. Sail track will be finished independently and bonded on afterwards.
Mast joiner glued on and sanded flush. Lots of mast sanding. Finished making up the sail track lengths. Just need a scarf for the main section and trimming for the top masts.
Nobody else here is logging a Paper Jet 14 yet. See the boat.