Epoxy work on the mast. Im still having issue with fisheyes and uneven epoxy, particularly on the vertical surfaces of the mast when encapsulating. Shaping of the sail track and scarfing on the main section. Mast hardware offered up for fit/ trimming. Final sh...
Read these entries in the log → Rig & Spars on every Paper Jet 14 →Rig & Spars
Mast, boom, standing and running rigging, sails.
20 entries from 4 logs, newest work first.
Today I planed and put in the bow batten. I had some extra thicken epoxy so I filled in some of the outside holes. I think that's just about all the parts that have to get mounted for the structure, so whenever I get some time I need a good 2-hour block, I'm g...
Read this entry in the log → Rig & Spars on every Tiny Titan →While waiting for the paint on the lofting plywood to dry, we spent about a hour rounding the mast. The area in the photo is where it will transition from the 8 sided base to round. Just starting that job, there will be more to do on it, later. But now, lunch,...
Read these entries in the log → Rig & Spars on every Spartan II →The 17' mast on Kembali is a hollow box with solid plugs on either end. The staves are scarfed from 3 pieces of solid timber, into which the tapers are cut from templates supplied by CLC. Then 3/4" rabbets are cut into both interior sides of the front and back...
Read these entries in the log → Rig & Spars on every The Guider →