Design
Carolina Express 25
Designed by Jacques Mertens
A 25 ft offshore express by Jacques Mertens of Bateau, on the same Carolina sportfishing hull as the Carolina Sportfish 25: flared bow with a fine entry, transom tumblehome and a skeg for tracking. Deadrise runs from 45 degrees at the cutwater to 17 at the transom. Beam is 8 ft 6 in, the stripped hull weighs about 1,900 lb, and power is up to 250 hp single or 400 hp twin.
Plywood cored epoxy and fiberglass composite, assembled stitch and glue style upside down on a jig; foam sandwich is the alternative. Not a first project, says the designer. The designer's figure is 120 hours for the hull and 300 to 500 for a finished boat. Measured medians from build logs appear below.
What building a Carolina Express 25 actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Carolina Express 25 here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Carolina Sportfish 25 | Bateau | 25′ 0″ (7.62 m) | 0 |
| Coastal Cruiser | Glen-L Marine | 25′ 0″ (7.62 m) | 0 |
| Oysta 25 | Devlin | 25′ 0″ (7.62 m) | 0 |
| Panga 25 | Bateau | 25′ 0″ (7.62 m) | 0 |
| Panga 25 Cabin | Bateau | 25′ 0″ (7.62 m) | 0 |
| True Grit | Glen-L Marine | 25′ 0″ (7.62 m) | 0 |