Design
Sea Angler
Designed by Glen-L Marine
A 35 ft 3 in convertible sportfisher and cruiser from Glen-L Marine with a huge low cockpit, fighting-chair space, bait prep and fish box, a flying bridge, and three cabins sleeping six with an optional inside helm. Tri-mode hard-chine hull in cold-molded wood; twin inboards for 14 to 17 knots; about 18,000 lb. Glen-L publish a beam of 13 ft 8 in and a hull depth of 7 ft-10 1/2 in.
Headroom below is 6'-3" to 6'-9". The hull is a hard chine form with convex bulbous deep vee entry and flaring topsides forward, and modified vee aft with flatter sections for stability and lower power requirements. Tri-mode hull form allows practical operation at various speeds. A large cold-molded build with a full interior. Expect 5,000 hours or more. Real hours from logged builds show below.
What building a Sea Angler actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Sea Angler here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Czarinna 35 | Devlin | 35′ 2″ (10.72 m) | 0 |
| 35 ft Packet/Coaster or Tramp | Benford Design Group | 35′ 0″ (10.67 m) | 0 |
| 35 ft Trawler Yacht Strumpet | Benford Design Group | 35′ 0″ (10.67 m) | 0 |
| 35 ft Tug Yacht | Benford Design Group | 35′ 0″ (10.67 m) | 0 |
| Dauntless | Glen-L Marine | 35′ 8″ (10.87 m) | 0 |
| Odyssea | Glen-L Marine | 35′ 8″ (10.87 m) | 0 |