Finished gluing on the other bottom plank. Lots and lots and lots of sanding to do, as these are very rough cuts.
Tiny Titan · new build
Glen L Tiny Titan Hydroplane
Building a small hydroplane for the kids to learn some basic boating skills on a fun boat!
1
Make a book
Feed
The whole log, 7 entries and every photo,
laid out as a book to print, bind and keep.
All steps
Shop & Tooling
Plans & Lofting
Hull Panels
Stitch & Assembly
Fillets & Taping
Glassing & Epoxy
Hull Exterior
Deck & Coamings
Fairing & Sanding
Systems
Rig & Spars
Oldest first
See Hull Exterior on other boats →
Before the sanding
So I'm showing the rough edges on all of the bottom of the hull. As you can see there's lots of mistakes, lots of Gap, lots of overlap, and lots of sanding to do. This will be a multi-day sanding project as I will start with 60 grit or 80 grit on the belt Sander and then work my way to about 120 to 150 grit to prep it for fiberglassing.
Nobody else here is logging a Tiny Titan yet. See the boat.
What it cost
$1,966.00$1,537.00
Into the boat
$429.00
Tools & gear
| Item | Qty | Supplier | Cost |
|---|---|---|---|
| Boat Plans | 1 | Glen-L | $75.00 |
| Ryobi Plug-in jigsaw | 1 | Home Depot | $100.00 |
| lumber | 1 | Home Depot | $100.00 |
| Fir AB Marine 1/4" 4x8 | 2 | Plywood company | $200.00 |
| Fir AB Marine 1/2" 4x8 | 1 | Plywood company | $137.00 |
| Birch 1/8 4x8 Plywood | 1 | Plywood company | $35.00 |
| Craftsman planer | 1 | Home Depot | $329.00 |
| Fasteners and Fiberglass kit | 1 | Glen-L | $400.00 |
| 6oz Fiberglass Cloth Roll | 1 | Amazon | $15.00 |
| 6HP 2 Stroke Hangkai Outboard Engine | 1 | Hangkai | $575.00 |