Design
Skoota 24
Designed by Richard Woods
A 7.52 m (24 ft 7 in) folding, trailable power catamaran by Richard Woods of Woods Designs, also sold by Bateau. It is a cruising development of the Skoota 20 for sheltered coastal water. The center-cockpit layout gives a double berth in an aft cabin and two singles in the saloon. A single 40 hp outboard gives a 10 to 14 knot cruise at about 10 mpg. Beam is 3.95 m and empty weight about 1,500 lb.
Like the 20 it is built in plywood over stringers and frames with glass and epoxy sheathing, in sections that fit a normal garage. Flat panels keep it within reach of an amateur with some experience. No hours are published; budget 1,000 to 1,800. Measured medians from build logs appear below.
What building a Skoota 24 actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Skoota 24 here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.