Design
Canyon Cruiser
Designed by Glen-L Marine
A 21 ft 3 in inboard sled cruiser from Glen-L Marine for whitewater rivers in any weather, with a hardtop cuddy cabin with standing headroom, a removable soft sunroof, pass-through to a forward cockpit, and an inboard jet or I/O under a raised aft deck with swim step. Sheet plywood over wood framing or welded aluminum; 6 or 12 degree aft-vee options. Glen-L publish a hull depth of 42 in/37 in.
The bare hull comes out at about 1400 lb. Headroom below is 6'-6'2". For power they specify inboard jets to 1100 lbs. A conventional plywood sled with a cabin on it. Budget 700 to 1,200 hours. Real hours from logged builds are below.
What building a Canyon Cruiser actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Canyon Cruiser here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Crispy 650 | Modern Wooden Boat | 6.5 m (21′ 4″) | 0 |
| Paloma 650 open | BCA Demco | 6.5 m (21′ 4″) | 0 |
| Vila 650 | BCA Demco | 6.5 m (21′ 4″) | 0 |
| Mini Maia 21 | Bateau | 21′ 2″ (6.45 m) | 0 |
| Little Cod 21 | Devlin | 21′ 5″ (6.53 m) | 0 |
| Capriccio | BCA Demco | 6.42 m (21′ 1″) | 0 |