Design
Outrage
Designed by Glen-L Marine
A 16 ft 5 in deep-vee outboard ski boat from Glen-L Marine, 12 degrees of deadrise with lift strakes and flaring topsides, for towing skiers through a chop without a beating. A walk-through cockpit for four with high coamings and a self-draining motor well; sheet plywood, about 450 lb, outboards to 125 hp. Glen-L publish a beam of 7 ft 0 in and a hull depth of 26 in.
They put the usual load at 1 to 4 people. The hull is a full length deep vee bottom with 12o deadrise, lift strakes, and flaring topsides. Developed for sheet plywood planking. They draw a matching trailer for her. A conventional plywood runabout build. Budget 300 to 500 hours. Real hours from logged builds are below.
What building a Outrage actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Outrage here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| 17' Ausflugsboot | Boatkits | 5 m (16′ 5″) | 0 |
| Hot Rod | Glen-L Marine | 16′ 6″ (5.03 m) | 1 |
| Outboard Dory 16 | Bateau | 16′ 6″ (5.03 m) | 0 |
| 16.3 ft Flat Bottom 495 | Response Marine | 16′ 4″ (4.98 m) | 0 |
| Cabin Skiff | Glen-L Marine | 16′ 3″ (4.95 m) | 1 |
| Audeen | Glen-L Marine | 16′ 3″ (4.95 m) | 0 |