Design
Tango
Designed by Glen-L Marine
An 18 ft 6 in trailerable overnighter sloop from Glen-L Marine that looks bigger than it is: berths for four adults, sitting headroom, galley space each side and a portable head, on a stiff, beamy hard-chine hull in three-eighths plywood, about 600 lb. Glen-L publish a beam of 7 ft 10 in and a hull depth of 4 ft 1 in.
They put the usual load at 2 to 4 people. Sail area is Main - 95 sq ft. Displacement is 1750 lb. Headroom below is 4'-6". The hull is a vee bottom hard chine developed for 3/8" sheet plywood planking. For power they specify short or long shaft outboard motor to 10 hp. They draw a matching trailer for her. Glen-L puts it well within reach of the average do-it-yourselfer, with full-size patterns and no lofting. Budget 450 to 750 hours, usually one to two years. Measured medians from logged builds appear below.
What building a Tango actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Tango here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Alpha 2 | Glen-L Marine | 18′ 6″ (5.64 m) | 0 |
| Autumn Leaves Canoe Yawl | Chesapeake Light Craft | 18′ 5″ (5.61 m) | 0 |
| BRIO 555 | BCA Demco | 5.55 m (18′ 3″) | 0 |
| Southwester Dory | Chesapeake Light Craft | 18′ 10″ (5.74 m) | 0 |
| Vagabond 18 | Bateau | 18′ 2″ (5.54 m) | 0 |
| Cruising Sloop | Butler Projects | 18′ 1″ (5.51 m) | 0 |