Making the Inner Stem from Recycled Church Pews
We're planning to make many components of the boat from reclaimed and recycled materials. Over the years Arnt has collected a lot of stuff, including a number of stacks of old growth Douglas Fir church pews. These bits we've put through the thickness planer are the ends of pews, you can see the rabbets for the seat tops and backs.
We traced out the pattern for the inner stem onto a worktop, placed a pew end on it, put the pattern on top, and selected the best angle to get the grain working with the curve. Trace it, cut on bandsaw, and repeat until we've built up to correct thickness, staggering the joints on each layer.
Once we numbered them so we'll know how it goes back together, the last task of the day was epoxying fir pieces into the holes of the seat-top rabbets so there will be no voids.