Design
Ocracoke 20-B
Designed by Graham Byrnes
A bracketed development of the Ocracoke 20 by Graham Byrnes of B&B Yacht Designs, 22 ft 5 in over the hull and its integral outboard bracket and 7 ft 10 in wide. Deadrise was raised to 16 degrees for rough water, and power is 90 hp recommended with 150 maximum. The first boat, launched in Australia, reported 39 knots with a 150. Construction follows the Ocracoke 20, cold molded plywood over permanent framing. Plans and CNC kits are offered.
B&B does not recommend it as a first build, while saying it should give no trouble to a patient builder who already knows wood, epoxy and fiberglass. Budget 1,200 to 2,000 hours as a rough guide. The medians below come from builders who logged this boat here.
What building a Ocracoke 20-B actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Ocracoke 20-B here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Jiffy 22 | Arch Davis Design | 22′ 6″ (6.86 m) | 0 |
| Jiffy V-22 | Arch Davis Design | 22′ 6″ (6.86 m) | 0 |
| Monsoon | Glen-L Marine | 22′ 3″ (6.78 m) | 0 |
| Vandal | Glen-L Marine | 22′ 3″ (6.78 m) | 0 |
| Escort | Glen-L Marine | 22′ 2″ (6.76 m) | 0 |
| River Crawler 22 | Devlin | 22′ 2″ (6.76 m) | 0 |