Design
Pro Tournament 21
Designed by Mark Bowdidge
A 6.4 m offshore centre console by Mark Bowdidge of Bowdidge Marine Designs, Australia, built in strip plank composite. The hull has 25 degrees of deadrise and flared bows on a 2.31 m beam, drawing about 373 mm. A single outboard of 150 to 175 hp is said to give 40 knots or more at 1,400 kg loaded, and 200 hp is the maximum. Fuel is 200 litres, or 300 as an option, and the fit-out includes a livewell, toilet, fish boxes and a walk-through transom.
The plans run to 25 sheets and a private strip-planking video. The method is learnable, but the volume of fairing and sheathing makes this a long build. With no designer figure, expect 1,200 to 2,000 hours. Measured medians from build logs appear below.
What building a Pro Tournament 21 actually takes
Medians from the build logs kept on this site, not the designer’s estimate. Nobody has logged this boat here yet, so they are empty until the first builder does.
Those medians firm up as more people log this boat.
Builds of this boat
Nobody has logged a Pro Tournament 21 here yet.
If you are building one, yours becomes the reference: the page the next person building this boat finds when they search for it. One photo and one line is a valid first entry.
Start the first log of this boatBoats like this one
Same type, closest in length.
| Design | Plans from | LOA | Logs |
|---|---|---|---|
| Classic 21 | Bateau | 21′ 0″ (6.4 m) | 0 |
| Float a Home | Grandpa's Archive | 21′ 0″ (6.4 m) | 0 |
| General Purpose 21 | Bateau | 21′ 0″ (6.4 m) | 0 |
| Kingpin | Glen-L Marine | 21′ 0″ (6.4 m) | 0 |
| Vera Cruise | Glen-L Marine | 21′ 0″ (6.4 m) | 0 |
| Capriccio | BCA Demco | 6.42 m (21′ 1″) | 0 |